< >

1MW CNG Gas Generator Set

Jichai Brand Generator is designed and manufactured to be high quality, long usage life, easy operation, low maintenance cost, high intelligence with low engine speed, low fuel consumption, low gas quality requirement, tough environmental adopt ability, high stability and low fluctuation. The generator is desirable for industrial power solution.

Contact Now E-Mail Telephone

Product Details

1000kw CNG Gas Generator is equipped with L12V190ZLT Gas engine made by Jinan Diesel Engine Company, Ltd. as original power.It is consisted of brush-less three-phase synchronous alternator, which is produced in China with Siemens technology and Control Panel made by advanced manufacturing plant.

1000kw CNG Gas Generator

Main specification of gas generator

Generator Set Model	1000GF-T
Rated Power	1000 kW
Rated Voltage	400 /6300/10500V
Rated Speed	1000 /1200rpm
Rated Frequency	50/60 Hz
Oil Consumption	≤0.3 g/kW·h
Heat Consumption	≤9500 kJ/kW·h
Rated Power Factor	0.8 (Lag)
Alternator Model	Siemens JFG series
Starting Method	Electrical starting
Operation Mode	Remote electrical control
Voltage Adjustment Method	Automatic
Governor Mode	Electric governor
Cooling Method of Genset	Forced water cooling

Technical Specification of Engine

Name	H16V190ZLT-2
Type	Four stroke, water cool, turbocharger inter-cooler, air-fuel ratio control,spark plug ignition, electrical control, external mix.
Cylinder Arrangement	V type, 60°angle
Number of Cylinder	16
Cylinder Diameter	190 mm
Piston Stroke	215 mm
Total Displacement	97.53 L
Rated Speed	1000 r/min
Idle Speed	700 r/min
Rated Power	1320 kW
Piston Average Speed	7.17 m/s
Natural Gas Pressure	7～9 kPa
Exhaust Temperature before Turbo	≤680 ℃
Output Water Temperature	≤90 ℃
Intercooler Input Water temp	≤45 ℃
Lube Oil Temperature	≤90 ℃
Stable Regulating Speed Rate	0～5% Adjustable
Lube Oil Model	Mobil Pegasus 705
Cooling System	Forced water cooling
Lubrication Method	Pressure lubrication and splash lubrication
Starting Method	Electrical motor starting
Crane-shaft Direction	Anti-clockwise (see from flywheel side)

Technical Specification of Alternator

Model	Siemens series
Rated Power	1000 kW
Rated Voltage	400/6300/10500V
Rated Frequency	50/60 Hz
Power Factor	0.8（Lag）
Rated Speed	1000/1200 r/min
Efficiency	93.9％
Connection Method	Three phases and three lines（Y ）
Excitation Method	Brushless excitation
Insulation Level	F
Protection	IP23
Cooling Method	Fan cooling（IC01）
Working System	Continuous working （S1）
Bearing Structure	Double bearing
Total Weight	8700 kg
Rotational Inertia	88 kgm2
Environment Temperature	≤40 ℃
Altitude	≤1000 m
Direction of Rotation	Clockwise (see from alternator side)
Alternator Leading Line Direction	Left side (See from alternator shaft side)

Requirements for fuel gas

In order to ensure its reliable and stable operation of the generator set, the requirements for the natural gas quality is as follows:
——Natural gas should be dehydrated without any water, crude oil & clean oil
——Natural gas pressure 100~400kPa;
——Natural gas temperature -20~40℃;
——Total sulfur content less than 200mg/m3.
Note: Gas volume is under standard condition with 100kPa atmosphere, 20℃ambient temperature,30% relative moisture.

Requirements for cooling water
Soften water is required by high temp and low temp engine circulation system. Cooling water should be lightly alkaline clean water without any corrosive compound, such as chloride,sulfate or acid etc.

Requirements for lubricant

Engine is equipped with complete lubrication system, with oil consumption≤0.3g/kW·h. Lubricant model: Mobil Pegasus 705 or 15W40CD.

Requirements for environment

Gas generator set can run steadily, reliably, continuously under following condition: ambient temperature between -40℃~+40℃,relative moisture<90%,sea level elevation≤2000m. The generator can output rated power under standard environmental conditions:atmosphere pressure 100kPa, ambient temperature25℃, air relative moisture 30%.

Certification

certification