1250kVA Natural Gas Engine Generator
Advanced configuration keep accurate ans stable working condition under high speed working speed
High generalization, easy maintenance, low maintenance cost.
Economical, low operating cost
Reduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.
Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.
The 1250kVA natural gas-fired power plant set adopts JICHAI H16V190 engine as a complete set, which is a prototype of 16V gas engine, and has developed a 16 cylinder V-type, high-power, high-performance engine suitable for low-pressure gas, with high intelligence, low heat consumption, high reliability, low emissions, and long service life.
Advanced configuration maintain correct ans steady working circumstance beneath excessive velocity working speed.High generalization, handy maintenance, low upkeep cost.Economical, low running cost
Reduced the carbon deposition on the put on of the engine cylinder and the valve to lengthen the the use of lifestyles of the genset.Adopt one of the world's most superior fuel manage technology, wholly reachable to the traits of gas.
1.Main Specification of Generator set
Model of generating set | 1000GF-T |
Model of engine | 16V190ZDT-2 |
Rated power(kw) | 1000 |
Rated speed r/min. | 1000 |
Rated voltage (V) | 415/240 |
Rated frequency (Hz) | 50/60 |
Rated power factor | 0.8 |
Supply method | 3 phases 4 wires |
Excitation method | brushless |
Starting method | 24V DC starter |
Speed modulate method | Electronic control |
Cooling method | Water cooling system |
Net weight Net weight (kg) | 11800 |
2.Main Specification of Alternator
Model | 1FC Series (SIEMENS technology) |
Rated power(kw) | 1000 |
Rated voltage(V) | 415 |
Rated current(A) | 2164 |
Rated frequency(Hz) | 50/60Hz |
Power factor | COS=0.8(lagging) |
Rated speed | 1000 r/min |
Efficiency | 95 % |
Phase | 3 |
Connection | 3 phases 4 wires |
Excited method | brushless |
Insulation class | F |
Class of protection | IP23 |
Cooling | A fan at the drive end draws the cooling air |
Working model | Continues working(S1) |
Coupling | Elastic |
Bearing | Rolling bearing, 2PCS |
3.Main Specification of Engine
Model | 16V190ZDT-2 |
Rated power(kw) | 1000 |
Rated speed(r/min) | 1000 |
No. and layout of cylinders | 16-cylinder, 60° Vee |
Type | Four stroke, water cooled, turbocharged and after-cooled, pre-combustion chamber type spark plug, mix before compressor |
Type of combustion | Lean burn |
Gas pressure(bar) | 1-4 |
Gas consumption(Nm³/kwh) | 0.3 |
Specific oil consumption (g/kwh) | 1 |
Oil capacity (L) | 460 |
Bore(mm) | 190 |
Stroke(mm) | 210 |
BMEP(bar) | 9.26 |
Compression ratio | 8:1 |
Total displacement(L) | 97.53 |
High temperature water capacity (L) | 250 |
Low temperature water capacity (L) | 150 |
Emission | Meet IMO code |
Exhaust temperature (before turbine ℃) | ≤650 |
Direction of rotation | Counter-clockwise (facing to flywheel) |
Intake air flow(m³/h) | 2077 |
Exhaust gas flow(m³/h) | 2227 |
Lubrication method | Pressure and splash lubrication |
Overhauling time(H) | 36000
|
High Configuration:
· Ignition system: ALTRONIC(USA)
· Starting system: DC24V electric motor.
· Mixer: IMPCO(USA)
· Sparking plug:STITT
· Engine Control System: Woodward(USA), HEINZMANN(Germany)
· Electric Control System: IG-NT(Czech Republic) ComAp(Czech), Deepsea(UK)
· Alternator: Siemens, LEROY-SOMER, Marathon
After Sale Service
1.Efficient meticulous technical services
2.Adequate spare parts
3.Round-the-clock after sale service
Packing&Delivery
Packing&Delivery：WOODEN CASE/PLYWOOD CASE
1) Genset would be included with plywood containers ;
2) Control panel, batteries, electric powered cables are packed with plywood packing containers or cartons;
3) Exhaust pipes, engine mufflers are put in the container barring packing.
We typically undertake transport via bulk cargo, container, packing Standard export packing, or personalized packing as your request. We will prepare the most economical transportation mode in accordance to the volume of products. All merchandise have long gone thru strict inspection and are in accurate circumstance earlier than shipment. We attempt for one hundred percent client delight on each and every sale we close.
Production line
Exhibition
More Products
