1000GF-T Natural Gas Generator
Advanced configuration keep accurate ans stable working condition under high speed working speed
High generalization, easy maintenance, low maintenance cost.
Economical, low operating cost
Reduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.
Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.
The 1000kw natural gas generator set is equipped with a complete set of Jichai H16V190 engine. This model is based on 16V gas engine and has been developed as a 16 cylinder V-type, high-power, high-performance engine suitable for low-pressure gas, high intelligence, low heat consumption, high reliability, low emissions, and long service life.
This gas generator sets have the features of accurate voltage regulating, good dynamic performance, less voltage waveform distortion, high efficiency, compact structure, easy to maintain, low speed, reliable and long-life operation and cost-effective.
1.Main Specification of Generator set
Model of generating set | 1000GF-T |
Model of engine | 16V190ZDT-2 |
Rated power(kw) | 1000 |
Rated speed r/min. | 1000 |
Rated voltage (V) | 415/240 |
Rated frequency (Hz) | 50/60 |
Rated power factor | 0.8 |
Supply method | 3 phases 4 wires |
Excitation method | brushless |
Starting method | 24V DC starter |
Speed modulate method | Electronic control |
Cooling method | Water cooling system |
Net weight Net weight (kg) | 11800 |
2.Main Specification of Alternator
Model | 1FC Series (SIEMENS technology) |
Rated power(kw) | 1000 |
Rated voltage(V) | 400 |
Rated current(A) | 2164 |
Rated frequency(Hz) | 50/60Hz |
Power factor | COS=0.8(lagging) |
Rated speed | 1000 r/min |
Efficiency | 95 % |
Phase | 3 |
Connection | 3 phases 4 wires |
Excited method | brushless |
Insulation class | F |
Class of protection | IP23 |
Cooling | A fan at the drive end draws the cooling air |
Working model | Continues working(S1) |
Coupling | Elastic |
Bearing | Rolling bearing, 2PCS |
3.Main Specification of Engine
Model | 16V190ZDT-2 |
Rated power(kw) | 1000 |
Rated speed(r/min) | 1000 |
No. and layout of cylinders | 16-cylinder, 60° Vee |
Type | Four stroke, water cooled, turbocharged and after-cooled, pre-combustion chamber type spark plug, mix before compressor |
Type of combustion | Lean burn |
Gas pressure(bar) | 1-4 |
Gas consumption(Nm³/kwh) | 0.3 |
Specific oil consumption (g/kwh) | 1 |
Oil capacity (L) | 460 |
Bore(mm) | 190 |
Stroke(mm) | 210 |
BMEP(bar) | 9.26 |
Compression ratio | 8:1 |
Total displacement(L) | 97.53 |
High temperature water capacity (L) | 250 |
Low temperature water capacity (L) | 150 |
Emission | Meet IMO code |
Exhaust temperature (before turbine ℃) | ≤650 |
Direction of rotation | Counter-clockwise (facing to flywheel) |
Intake air flow(m³/h) | 2077 |
Exhaust gas flow(m³/h) | 2227 |
Lubrication method | Pressure and splash lubrication |
Overhauling time(H) | 36000
|
CONTROL PANEL
Control panel is panel type, vertical structure, model is GPL1200. Control panel is equipped with meters showing various parameters of operating status, automatic air switch and timer. All of the electric cells possess three-proof functions.
The Generator possesses the following automatic monitoring and protective functions:
A) Audio or visual alarm for:
- High oil and water temperature
- Low oil pressure
- Over current
- Short circuit
- Over-speed
- Reverse power
B) Shut-off for:
- Low oil pressure
- Over-speed
- Short circuit
- Over-speed
- Reverse power
C) Trip-off for:
- Over-current
- Short circuit
- Reverse power
The generator can not only supply power directly to load but also can be paralleled running.
OPTIONAL DEVICE
Steel Soundproof Container (sound attenuated canopy)
CHP/ Cogeneration/CCHP Trigeneration
ATS and Synchronization Parallelling Panel
Oil and Water Heater
After Sale Service
1.Efficient meticulous technical services
2.Adequate spare parts
3.Round-the-clock after sale service
Packing&Delivery
WOODEN CASE/PLYWOOD CASE
1) Genset would be protected with plywood containers ;
2) Control panel, batteries, electric powered cables are packed with plywood bins or cartons;
3) Exhaust pipes, engine mufflers are put in the container except packing.
Production line
Exhibition
More Products
